High quality ‘wet look’ shine for improved appearance. Thermoplastic polymer protects the floor. Builds good slip-resistance – no health and safety concerns.  A high quality acrylic polymer-based metallised floor polish, which dries to an outstanding ‘wet look’ finish, with excellent slip resistance. An ultra modern floor polish, which offers gloss, ultimate durability, and the perfect base to clean, protect and prolong the life of a floor. Hi Gloss Polish is suitable for use on non-porous floors, including; vinyl, rubber, linoleum, thermoplastic, asphalt, sealed wood, sealed cork, marble and terrazzo. Recommended for use in schools, colleges, hotels, offices, airports, factories, shops, shopping centres, ferries, bars, nightclubs and pubs. Directions for use of Hi Gloss Polish – Preparation: To obtain optimum results, it is important that thorough preparation of the floor is undertaken. The floor must be thoroughly cleaned to remove all dirt, grease and old polish films by using a quality polish remover such as Cleanwell’s Easi Strip 1 Floor Stripper. The floor must be well rinsed with water and allowed to dry before applying Hi Gloss Polish. Application: Apply a thin film of Hi Gloss Polish (undiluted) using a mop or polish applicator. Drying time is normally around 30 minutes. Apply a second coat and allow to dry. Coverage is dependent on the porosity of the floor covering. In general, 5 litres of Hi Gloss Polish will cover approximately 300 square metres of floor. Available in 5 Litre bottles.

Floor Polish

To view our SC Johnson range of floor polish click here.

High Gloss Polish

To view our range of high gloss polish click here.

Cleanwell supply floor polish and high gloss polish to all parts of Ireland, including Dublin, Cork, Limerick, Waterford and Galway.